Cx concerns are unit has a leak in front middle burner. Confirmed leak NEED 1 DE81-09286A ?Front Center VALVE AND 1 82678 BURNER TUBE AND 6 86405 RINGS. VALVE IS NOT AVAILABLE. ordrng 6 DE81-07824A (Brass burner ring)s and 1 82678 (Burner tube) and 1 DE81-09286A (Fromt center valve)

"Replaced bake element. Tested function, unit working to factory spec."

Cx complaint unit leaks a lot during every cycle by drain pump / says its been this way for a while / diagnosis drain filter was not screwed in all the way and was leaking on every test / advised cx she must tighten filter until it bottoms out and cant turn anymore / no defects with unit

"Replaced infinite switch and temp sensor. Cx said tried using oven clean and was getting no heat at all now. Tested elements, bake element was no longer getting hot but got hot on previous visit. Tested continuity, and nothing. Visual inspection showed short on element. Needs W10779716 bake element. ; ordrng 1 W10779716 (Bake element)"

Cx concerns are unit has error code. I found water in bottom float switch. Dried out and ran for leaks. No leaks. Unit runs to specs