Installed new ice maker assembly and ran through test / reset on ice maker / unit is functioning as should and advised ice production will begin in 24/48 hours / no further defects with unit.

diagnosis found physical ice maker to be working but temps are not low enough in freezer / sufficient cooling but evap fan not working / incorrect voltage at PCB to fans / confirmed with fast track diagnosis / ordering main PCB and returning for repair / no further defects / ; ordrng 1 DA92-00426A (Main PCB assy)

diagnosis dryer is igniting and heating as should / found venting to be blocked / insufficient airflow /

diagnosis auger motor checked fine / temp in freezer at 5 degrees / confirmed ice room fan is working and proper voltage to ice maker / need to replace ice maker assy only / no further defects with unit. ; ordrng 1 DA97-15217D (Ice maker assy)

"Replaced vario motor. Tested function is service mode, no codes, unit working to factory spec. No further issues"