"Cx concerns are unit is giving F9E1 error code, put unit into diagnostic mode and got F9E1(no drain) and F9E2(drain motor electrical failure) these codes can be caused by a physical blockage, ran through service cycle and got no repeat error codes unit tested ok to factory specs"

"Troubleshooting lg Refr,I put in test mode ok ,I found faulty compressor,and filter drier ; ordrng 1 Tca3851706 (Compressor) and 1 Adh73650210 (Filter drier)"

"Cx concerns are unit is leaking from right side, took condenser cover off and visually observed drain line not seated properly in drain pan causing water to leak out, reseated drain line in pan, unit tested ok to factory specs

"Issue wrong temp in unit, heating issue. O issue with gas pressure, unit is converted properly to propane.set oven to 350 unit never cycled heat off. ; ordrng 1 G20c02-030523 (Thermostat) and 1 G20c01-072400 (Thermalcoupling)"

"Troubleshooting,Lg ref , I found faulty compressor ,checked pct main board put in test mode ,ok I found power to the compressor ,177,volts ok ,compressor is locked,not winding readings, need to be replaced # Tca37032028 ( 600A) and need filter drier # adh73150210,customer prefer do the job in the morning ; ordrng 1 Tca37032028 (Compressor)"