"Cx concerns are unit is burning food when cooking in top oven, I first checked for error codes and found none, I then ran a temp calibration on unit and adjusted temp then tested unit set to bake on 350? and unit heated and cycled with no issues"

"I inspected unit and found that light inside unit had bad filament and no further parts are needed for repair, unit heats ok to factory specs."

"Cx concerns are unit is not cooling in fridge section and ice maker does not work. I put unit into self diagnosis mode and got no error codes. I then checked at control board for proper voltage to ff compartment temp sensor and that checked ok but sensor has incorrect ohm measurement. I verified fan is operating and I determined a new temp sensor is required. Cx also needs to have ice room steamed out to remove all access ice buildup on ice maker. ; ordrng 1 DA32-00011C (Temp sensor)"

"Cx concerns are unit still heats intermittently, I rechecked all connections on unit and is still pulling 16 amps during operation but internal light does not come on during operation. I verified supply voltage to relay board and determined board is defective causing intermittent issue, placing part on order follow up required; ordrng 1 W11486781 (Control board)"

Customers concerns are the refrigerator is making noise. I found a defective condenser fan motor.