unit reset and runing to factory specs

"Customer concerns are lint filter gets jammed and wont pull out or lifts out the housing gets stuck in blower housing and drum wont rotate. Duct assembly, belt, lint filter were replaced. No further issue found with unit"

Installed drain pump and tested unit. Unit is running to factory specs.

Complaint: No Ice. Diagnosis: Opened unit and put unit into diagnostic mode and got an E-5 error code. Ice maker thermistor is bad and ice maker needs to be replaced. Order parts and return to fix unit ; ordrng 1 W11294907 (Ice Maker)

"Customer concerns are refrigerator is leaking from the bottom, and isn't making ice properly, as if it's refrozen ice. Ran in diagnostic mode defrost heater is working to factory specs. Found that the drain hole was clogged with ice. Unclogged drain hole. Poured hot water to see if it will drain. No issue with unit draining."