"I installed part. Ui board did not turn on. Board is getting power, harness is good. Control board must have faulty in it. Needs control board. OrderingEstimate staying the same.; ordrng 1 WD21X31911 (Control board)"

Cx concerns are unit does not power on. I found UI board receiving high current directly at board and not turning on. Unit needs UI board. ordrng 1 WD21X23556 (Ui board)

Cx concerns are unit leaked and had e15 code also has e22 every month. I found no water in float switch and tested unit while pulled out and no leaks. E22 is dirty filter code. Could not recreate problem. Unit runs to specs.

Cx concerns are unit is not draining or spinning. I found unit draining and spinning in drain spin. I cleared overload otb codes. Washer is being used in quick wash with huge loads. I instructed manager of place to not use quick wash for the loads they regularly do. Unit runs to specs.

Installed new pressure sensor and new turbidity sensor and tested / unit is now operating to factory specs with no defects or faults / no further defects with unit /