Customer concers are washer isn't working properly. Found that unit is draining and filling without issue. Found that unit isn't spinning. Unit gave error code F06. Found fualty MCU. Replaced MCU. Ran it through a diagnostic mode. No further issues with unit.

"Customer concerns are unit isn't cooling properly in ff section giving error code sy cf. Which is a communication failure. Unplugged unit and plugged back in. Ran in diagnostic mode found no further issues with unit.

"Customer concerns are unit is still leaking from ff section from under crisper drawer. Found that the drain hole was closed. Found that the duck bills for the drain line were obstructed, causing issue. Replaced with new duck bills. Unit is now draining water without issue.; used 1 DA82-01415A (Leak kit) from stock"

"Customer concerns are unit is draining water. Ran in diagnostic mode found no issue with drain, but unit doesn't spin or rotate. Motor ohmed out correctly. Found that the CCu is sending proper voltage to the MCU, but unit still won't spin. Unit gave error code F06, dealing with the speed of unit.. Found fualty MCU not providing voltage to motor. ordrng 1 W10756692 (Washer motor control)"

"Customer concerns are dishwasher isn't getting hot. Ran in diagnostic mode 3x found that the water temp 85?. HW from kitchen sink is hot. Tested heater, no issue found. Found that the voltage is out of range in unit. Replaced main pcb of unit.