"Customer concern frezzer dont work properly,troubleshooting pcb main tested mode ok found partial restriction,cleaned system deep vacuum and recharge whit the proper amount of refrigerant (5.11)temperatures started to drooping down ,sealed system.

"Customer concern freezer dont work properly ,troubleshooting pcb main boardtested mode ok fans working call tec support ,I turn off the unit to equalization I found partial restriction,cleaned system deep vacuum and recharge whit the proper amount of refrigerant (5.11 onz) ,temperatures started to drooping down sealed system completed"

"Customer concern refrigerator not cooling. I proceeded to take temp and found both compartments 65 degrees. Compressor amp draw 0.90 amp, condenser 70 degrees. updated software and replace compressor with filter.used 1 TCA38151706 ( Compressor), and 1 ADH73150210 ( Filter drier) from stock"

"Customer concers are unit wasn't installed back properly, unit will tip over when loading. Found that unit want screwed. Screwed left side to cabnits.