Frigidaire Affinity Dryer Error Codes Explained

Frigidaire Affinity dryers are high-quality, but they can have problems like any appliance. When something’s wrong, they display specific error codes on the control panel.

Knowing what these codes mean can help you fix simple issues yourself and save money instead of calling an appliance repair professional. This guide lists the most common Frigidaire dryer error codes and gives you step-by-step fixes.

Frigidaire Affinity Dryer Error Codes + Fixes

Here are the most common error codes for Frigidaire Affinity dryers and how to resolve them.

E11 – Electronic Control Board Communication Error

The E11 error indicates a communication problem between the user interface control board and the main electronic control board.

To resolve an E11 error:

1. Unplug the dryer for 5 minutes to reset the electronic systems.
2. Plug the dryer back in and restart the cycle.
3. If the error persists, check the wire harness connections between the control board and user interface.
4. Look for signs of damage or loose connections.
5. If the problem continues after checking connections, one of the control boards may need replacement.

E13 – Heat Source Problem

An E13 error suggests an issue with the dryer’s heating element, thermal fuse, or related components. The dryer has detected that it’s not heating properly.

To fix an E13 error:

1. Unplug the dryer for safety.
2. Check the exhaust vent for blockages and clean if necessary.
3. Ensure that the exhaust vent flap opens properly when the dryer is running.
4. Test the heating element for continuity using a multimeter.
5. Check the thermal fuse for continuity; if it’s blown, replace it.
6. Inspect the high-limit thermostat for proper operation.
7. If all components check out but the problem persists, the electronic control board may be at fault.

E14 – Thermistor Error

This error code indicates a problem with the thermistor, which monitors the temperature inside the dryer.

To address an E14 error:

1. Disconnect the dryer from power.
2. Locate the thermistor (usually a small device attached to the blower housing or heating element).
3. Inspect the thermistor wiring for damage or loose connections.
4. Test the thermistor with a multimeter to check if its resistance changes with temperature.
5. If the thermistor is faulty, replace it with a compatible part.
6. After replacement, clear the error code by resetting power to the dryer.

E15 – Motor Control Unit Error

An E15 error suggests a problem with the motor control unit or the motor itself.

To resolve an E15 error:

1. Unplug the dryer.
2. Check that the drum rotates freely by hand. If it’s difficult to turn, check for obstructions.
3. Inspect the drive belt for damage or wear.
4. Check the motor’s wire connections for security and damage.
5. Test the motor windings with a multimeter if you have technical skills.
6. If all physical checks pass, the motor control unit may need replacement.
7. For persistent issues, professional diagnosis may be necessary.

E42 – Control Panel Button Error

The E42 error occurs when the dryer detects that a button on the control panel is stuck or has been pressed for too long.

To fix an E42 error:

1. Disconnect power to the dryer.
2. Examine the control panel for stuck buttons.
3. Clean around the buttons with a dry cloth to remove any residue.
4. Gently press each button to ensure none are stuck.
5. Reconnect power and test the dryer.
6. If the error persists, the control panel assembly may need replacement.

E52 – Bad Main Electronic Control Board

This error indicates a failure in the main electronic control board, which is the primary circuit board that controls the dryer’s functions.

To address an E52 error:

1. Unplug the dryer for at least 5 minutes to reset the electronics.
2. Restore power and check if the error recurs.
3. Inspect the main control board for signs of damage, such as burnt components or swollen capacitors.
4. Check all wire connections to the control board for security.
5. If the error persists, the main electronic control board likely needs replacement by a professional.

E54 – Motor Drive Error

An E54 error suggests an issue with the motor, its wiring, or the motor control circuit.

To resolve an E54 error:

1. Disconnect power to the dryer.
2. Check if the drum turns freely by hand.
3. Inspect the motor wiring for damage or loose connections.
4. Check the drive belt for proper installation and condition.
5. Ensure the idler pulley moves freely.
6. Reset the dryer by unplugging it for 5 minutes.
7. If the problem continues, professional service may be required.

E58 – Power Supply Frequency Error

The E58 error occurs when the dryer detects an abnormal power supply frequency, either too high or too low.

To fix an E58 error:

1. Check if other high-power appliances are running on the same circuit, which could affect voltage.
2. Ensure the dryer is plugged directly into a wall outlet, not an extension cord or power strip.
3. Test the outlet with a voltage meter to confirm it’s providing the correct voltage.
4. If you live in an area with unstable power, consider using a voltage regulator.
5. Reset the dryer by unplugging it for 5 minutes.
6. If the error continues, have your home’s electrical supply checked by an electrician.

Resetting Your Frigidaire Affinity Dryer

If an error code pops up, a reset might fix it. Here’s how:

• Hit “Cancel” to stop the current cycle.
• Unplug the dryer and wait 5 minutes.
• Plug it back in and start a new cycle.
• If the error won’t go away, try a factory reset—check your owner’s manual for the right button combo to hold down.

When to Call a Professional

You can fix a lot of these error codes yourself, but call a professional if:

• You’ve tried the fixes and the error’s still there.
• It’s about electrical parts and you’re not sure what you’re doing.
• The repair means taking apart more than just the basic panels.
• Your dryer’s under warranty—DIY fixes could mess that up.

Frigidaire Affinity dryer error codes tell you what’s wrong so you can fix it fast. If you’re attempting DIY fix, always unplug the dryer before poking around inside for safety. If you’re stuck or unsure, consider reaching out, we’re here to help!