Kenmore Washing Machine Error Codes: Causes & Solutions

Kenmore washing machine error codes help technicians and owners figure out what’s gone wrong with the appliance. While they don’t always identify the exact problem, they point you in the right direction so you can find and fix the issue more quickly. They also act as a warning system, alerting you that there’s an issue so problems don’t get left unresolved and turn into bigger ones.

In this article, we’ll provide some examples of the different error codes found on Kenmore washers. However, for the most accurate error codes for your specific Kenmore washer model, we recommend checking your washer’s user manual.

Kenmore washing machine error codes

Kenmore doesn’t actually produce its own washers; instead, they are manufactured by various companies, including Whirlpool, LG, Frigidaire, Samsung, and more. Because of this, Kenmore washer error codes can vary significantly, depending on the manufacturer and model.

Below, we’ve listed some error codes for some specific Kenmore washing machine models.

Kenmore 796 (Front load and top load)

These error codes can help you identify and troubleshoot issues with your Kenmore 796 front-load or top-load washer:

IE

The error code means the washer is filling slower than expected. To fix this:

• Check the water supply is turned on.
• Check the water supply hoses for kinks.
• Check if the water inlet valves are clogged or faulty, and replace them if they are.

UE

This error code means the load is unbalanced or too small. Try this to resolve:

• Ensure the washing machine is level.
• Add a few more items if the load is small.
• Redistribute the load evenly around the tub if it’s tangled up.

OE

This error code means the washing machine is draining slower than expected. Try the following:

• Check the drain hose for kinks.
• Check the drain pump filter for clogs.
• Inspect the drain pump for damage or test it with a multimeter. Replace if faulty.

FE

This error code means the water level is too high (overfilled). To fix this:

• Check if the tub continues filling with water when the appliance is unplugged. If so, a water inlet valve is leaking. Replace the valve assembly.

dE

This error code means the door (front-load) or lid (top-load) is open. To resolve this error, try the following:

• Open and close the door or lid.
• Check for any laundry items obstructing the door or lid.
• Inspect the door or lid for damage. Replace any broken parts.
• Test the door or lid switch with a multimeter. Replace if faulty.

Kenmore 110 (Top load)

These error codes can help you identify and troubleshoot problems with your Kenmore 110 series top-load washer:

F0 E2

This error code means there are excessive suds in your washer. Try the following to resolve it:

• Use High Efficiency (HE) detergent as recommended.
• Try reducing how much detergent you use.

F1 E1

This error code means there’s an issue with the main electronic control board. To fix this error, try:

• Reset the washer by unplugging it for 5 minutes, then plugging it back in.
• If the error returns, check the main electronic control board’s wiring connections. If they are fine, the board may need to be replaced.

F2 E1

This error code means there is a stuck key on the user interface control. You might be able to fix it by:

• Try to release the stuck button by pressing it or cleaning the area.
• If the button cannot be freed, replace the user interface control.

F7 E6

This error code means there is an issue with the drive motor. Try the following to fix it:

• Unplug the washer and wiring connected to the drive motor.
• Test the drive motor with a multimeter. If faulty, it will need replacing.

F9 E1

This error code means the washing machine is taking longer than expected to drain. Try resolving the error by:

• Inspect the drain hose for clogs or kinks.
• Inspect the drain pump filter for blockages.
• Check the drain pump for damage or test it with a multimeter. Replace if defective.

Kenmore 417 (Front load)

Use these error codes to help identify and troubleshoot issues with your Kenmore 417 series front-load washing machine:

E31

This error code means there’s an issue with the water level pressure sensor. Try the following to fix it:

• Unplug the washing machine and check the wire connections on the water level pressure sensor.
• Test the water level pressure sensor with a multimeter. If faulty, replace the sensor.

E43

This error code means there is an issue with the door lock circuit. To resolve it, try the following:

• Unplug the washing machine and check the wire connections on the door lock assembly.
• Inspect the door lock assembly for damage and test it with a multimeter. If faulty, replace it.

E55

This error code means the drive motor is overheating. Try the following steps to fix it:

1. Unplug the washing machine.
2. Remove the drive belt.
3. Check if the motor pulley spins freely. If not, replace the drive motor.
4. Check if the big drive pulley spins freely. If not, replace the outer tub and spin basket.
5. If both pulleys spin, check for a faulty motor control board.

E67

This error code means the microprocessor on the electronic control board is getting the wrong voltage supply. Try the following:

• Reset the washing machine by unplugging it for 5 minutes, then restoring power.
• If resetting the washer doesn’t resolve the issue, the electronic control board will need replacing.

E75

This error code means the water temperature sensor circuit has failed. Try the following to resolve the error:

• Unplug the washer and use a multimeter to test the water temperature sensor. If the reading isn’t close to 50,000 ohms at room temperature, replace the water inlet valve assembly (since the sensor can’t be replaced separately).