Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.
for Central Islip, NY
RANGE AVANTI ERU200P0W Customer front right burner not heating,I found the problem to be the burner element not in the block receptical properly adjusted tested now working to factory specs"
REFRIGERATOR LG LRFVC2406S/00 "Customers concerns were noise coming from refrigerator, and freezer door handle loose, I tightened door handle, put unit in test all fans working to factory specs, good frost pattern couldn’t duplicate problem"
RANGE AVANTI ERU240P0W Customers concern is top burner shut down after prolonged use explain to customer this is normal for this Avante range working to factory specs
MICROWAVE LG LMHM2237ST.BSBELGA Replaced door showed customer unit working to factory specifications no other issues
WASHER LG WM3670HVA Complaint: Leaking. Diagnosis: Opened dryer up to find all these defective parts. Order parts and return to fix unit. ; ordrng 1 4681EA2001T (DRAIN PUMP) and 1 5215ER2002G (DRAIN HOSE) and 1 5220FR2006H (HOT VALVE) and 1 5220FR2075L (COLD VALVE)
WASHER WHIRLPOOL WTW5500DW1 "Customer complaint not agitating , found bad motor
REFRIGERATOR SAMSUNG RS25J500DW/BY "Customers concern is no cold in f/f section of unit, I found the problem to be the evap, fan motor no good,I will order new now; ordrng 1 DA31-00287B (EVAP, FAN MOTOR )"
RANGE FRIGIDAIRE FGS379ECB Installed frigidaire range new clock. Unit is now working properly.
REFRIGERATOR LG LFX28968ST Unit has internal lg refrigerator refrigerant leak. Verified with tech line and they will contact customer on warranty
RANGE FRIGIDAIRE FGS379ECB EST with refrigerator repair; frigidaire range ordrng 1 318185495 (clock/timer)
RANGE AVANTI ERU200P0W "Customers concerns were Avanti gas Range not all the top burners are heating and oven control knob melted, I found two of the burners not in the recepticals properly I adjusted tested now working, will need new oven temperature control knob, I will order first thing on Monday morning, CUSTOMER WAS USING ALUMINUM FOIL UNDER BURNERS TOOK PICTURES EXPLAINED THIS IS NOT TO BE DONE.