Installed new door bellow and spring retainer for bellow and ran unit through diag / no further defects at this time / unit operating within factory specs.

Cx complaint door gasket keeps popping off and spring also twisted and stretched / tried to bend back / also found pinhole in gasket leaking by bottom of door / need to replace gasket and spring together / no other defects as per cx / ; ordrng 1 W11266654 (Boot spring clamp) and 1 W11314648 (Bellow)

Replaced switch interlock assy and unit tested ok to factory specs

"Cx concerns are unit gives error code to open and close door, looked up service bulletins for issue and found pointer to replace interlock assemblies for intermittent open/close door code, placing servic, ; ordrng 1 W11244490 (Interlock kit)"

"Issue has company couldnt do gas conversion. Found that the right LP conversion is part#W11581316, called tech line to confirm orfice # 54, no issue with regulator but the threads of the orfice are damaged