Removed old felt and replaced with a new one making sure it was on properly. Advised that adhesive needs to cure so its gonna need a few days to cure.

"Issue knob for center burner is stuck. Was able to free it by burning it, knob is a little stiff compared to the other burners but is working.

"Issue unit is leaking, water came out the unit and it gave error code F1. Ran bottom drawer in diagnostic mode, lid actuators are coming down properly, no leak from bottom drawer; ran top drawer in diagnostic mode found that the front lid isnt coming down. Theres no difference between top and bottom yokes, top yoke is on properly to lid, no obstruction in yokes channel. Unit will need replacement actuators.; ordrng 1 528112 (Lid actuator)"

"Issue water isnt draining and dishes didnt wash properly and wasnt dry leaving spots on dishes. Ran unit no issue with draining. Ran in diagnostic mode heater is receiving proper voltage and has good resistance, no issue with fan assembly

"Issue F1 error code. Found the bottom near board flooded, dried up the water and ran in diagnostic mode, no leak found with unit, no issue with lid sealing. Ran on a fast cycle had unit running no leak coming from either drawe