"Customer complaint ne code popped up again. Tested voltage in test mode to vario motor, was getting correct 120v. Checked resistance, got 0. Needs vario motor 4681ED3001D; ordrng 1 4681ED3001D (Vario motor)"

Cx complaint freezer still not cooling properly / recorded 22 degrees in freezer and 36 degrees in fridge / removed evap cover during force freeze cycle and found weak cooling / no errors / sealed system repair needed / all other components working / ordering compressor and filter drier / ; ordrng 1 MKV172CL2J/SM1 (Comp) and 1 DA81-06007A (Filter drier)

"Cx concerns are unit is not drying dishes, visually observed that heating element is broken. I ran unit through service cycle to confirm all other components are working, unit finished service cycle with no issues, determined heater element needs to be replaced.

Installed new main PCB and tested functions of fans and outgoing voltage from board / unit working to factory specs with no further defects found.

Installed new ice maker assembly and ran through test / reset on ice maker / unit is functioning as should and advised ice production will begin in 24/48 hours / no further defects with unit.