"Replaced thermal control board. Tested function, unit working to factory spec. No further issues."

"Issue unit isnt cooling. Found no issue with unit cooling, fz is cold and ff section is cooling. Back panel of both sections are frosted over.

"Replaced hot water valve with new. Ran service cycle and checked for codes. No codes and unit is working to factory spec, no further issues."

Upon arrival unit was outside and not installed correctly. Informed customer that unit needs to be installed correctly inside as it is not an outdoor fridge

Upon arrival water still in tub. Put into diag and found codes OE and 4E for water supply error. Ran service cycle and found once hot water was entering unit, it would not stop with power off and unplugged until I turned water off. Needs hot water valve DC62-30312J; ordrng 1 DC62-30312J (Hot water inlet valve)"