Installed simmer ring. Tested middle burner. Explained to cx steps to ignite properly. Unit runs to specs.

Customers concerns are the refrigerator is not cooling. I repaired a leak at the low side val e and the refrigerator tested okay to factory specs.

Customers concerns are the refrigerator is not cooling properly. I had to reevacuate the unit recharge and the refrigerator is working to factory specs

Cx concerns are unit has rubber burning smell in spin and not enough water when washing. I found water pressure low that failed pressure sensor test. Techline recommended cx to use deep fill and deep rinse and have plumber check pressure. No visible place smell is coming from. Unit runs to specs

"Cx concerns are freezer not cooling. Found temperature readings out of range in fz. Called techline. Test 04 - read 11 degrees test 02 -55 degrees, test 03 - 22 deg. Test 17- open , 17 thermistor part spliced in. Needs 2 fz thermistor and main control. File #7741314446. ; ordrng 1 W11715973 (Harness with thermistor) and 1 W11318270 (Thermistor) and 1 W11664342 (Control board)"