Issue no cold in ff section. Found fz evap with an inch of frost coming through the back cover. Called tech line because I had resistance through the harness from the board found faulty control not staying in forced defrost when in diagnostic mode. Fle 87778689; ordrng 1 5304532180 (Power board) and 1 5304526032 (Defrost heater)

"Complaint oven getting too hot and burning food. Upon diag, found error code for oven over temp when heating. Tested temp sensor and found to be reading correctly. Ordering new board and new temp sensor as precaution. ; ordrng 1 W11536794 (Main control) and 1 WPW10181986 (Temp sensor)"

"Issue unit has a aerosol paint smell, and oil in a pan. Found that unit is in garage; I didnt smell any odd smell from unit; and liquid/ fluid in pan doesnt have a smell or feel like oil, its the water from the defrost.

Replaced infinite switch. Warning light is now off and all burners are functi9ning properly. No further issues.

Issue unit isnt cooling. Found evap covered in frost. Ran in diagnostic mode no issue with fans. Found no voltage going to the defrost heater. Defrost heater has continuity at the board. Found faulty control causing issue. ; ordrng 1 5304532180 (Power board)