Installed mullion. Door closes to specs. Unit runs to specs.

"Issue no ice production. No issue with temp of the fz. Cycled ice maker in diagnostic mode no water came out. Replaced ice maker, no further issue with unit found.

"Cx concerns are ice maker stops producing ice and leaks from dispenser but has since not had any issues, I put unit into diagnostic mode and ran ice maker harvest and fill cycle and observed no issues with either process

"Issue ice maker isnt producing ice. Ran in diagnostic mode no issue with ice maker operation and filling with water. No issue with temp of fz. Notice that the light on control for ice maker was off.

"Complaint water not entering. Upon diag, found cold water pipe externally from unit to be frozen and not allowing water out of faucet on pipe. Swapped lines just to make sure valves are working properly on cold side which they are. Unit is working to factory spec, but since water is frozen in pipe cold side not working. soon as pipe thaws it will function normally. Unit is out on porch, but it is warm in porch with heat."