Cx complaint display screen does not work / diagnosis removed panel and re adjusted harness connections to board / display is now operating as should with no further defects / top burners and all oven functions working.

Cx complaint clothes come out wet after end of cycle / ran through diag and retrieved errors F5E2 and F8E1 door lock & pressure sensor / ran through diag cycle and found door lock to be Intermittent and also abnormally long drain times even through drain is emptying out all water / error code for pressure sensor came back after reset / will submit for parts necessary for repair / no other defects / ; ordrng 1 WPW10448876 (Pressure sensor) and 1 WPW10443885 (Door lock)

"Cx concerns are both compartments are not keeping temp and ice is forming in freezer and melting causing puddles on floor, I put unit into diagnostic mode and got no error codes. I then took temp readings of both compartments and freezer tested at 15?(set at -8?) and fridge tested at 31?(set at 33?) Adjusted hinge and gasket and unit tested ok to factory specs, advised cx to defrost unit to get rid of moisture buildup"

Installed new control panel assembly and ran through diagnostics / unit operating to factory specs with no glitches or freezing of control / no further defects with unit.

partial restriction in the condenser need new condenser# ACG75305801 , compressor #TCA 38151706, and need Door dispenser panel is broken #ACQ85430286; ordrng 1 ACG75305801 (Condenser) and 1 Tca38151706 (Compressor) and 1 ACQ85430286 (Door dispenser panel)"