"Cx concerns are spin cycle not working. I found only out of balance codes in unit. Unit went out of balance and possibly locked itself for a time. Cleared codes. Tested agitate and spin , runs to specs."

Cx concerns unit not responding. I moved ui harness cable and electric wiring. Unit is responding now and running.

"Cx concerns are drum leaving burn marks on blanket clothes. Tested vent pressure and temperature with techline. Both tested fine to specs, Ordering grate.; ordrng 1 D500820 (Grate outlet cover)"

I confirmed diagnosis and replaced piston and nut assy and unit began to drain and tested ok to factory specs. I ran unit and had it fill and drain 3 times to verify no leaks

"I rediagnosed unit and found obstructions in drain line, after clearing out drain line unit still would not drain with proper pressure I rechecked all hoses and found that auto clean filter plunger was completely stripped out and was affecting how much water was draining.