"Found that the CW valve is clogged with sediment, also found that the drain hose for the door gasket is clogged. Replaced CW valve and cleaned drain line for door gasket. No further issue with unit found

"Found that the CW valve is clogged with sediment, also found that the drain hose for the door gasket is clogged. Replaced CW valve and cleaned drain line for door gasket. No further issue with unit found

Customers complaint is water is pooling up on rubber gasket on front door and also it is not rinsing clothes that good / diagnosed rubber gasket to be clogged with debris and also cold water valve to be clogged and not operating at full pressure; ordrng 1 5220FR2075P (Inlet valve cold) and 1 MDS47123619 (Gasket)

Found water valve was relaxing too much water as bottom of ice tray was sheet of ice and cubes were a frozen block above ice maker.

Customers complaint is during any wash cycle the machine makes a tapping / clicking noise while spinning/ Tightened nut with impact driver and noise has went away /machine working to factory specs