Trimmed off excess copper line and re installed to water valve with new nut and wedge / tested for leaks and tested for proper dispensing / unit is working as should and no leaks from unit anymore / no further defects found.

Replaced snorkel switch no further issue with unit found.

I installed a new new dryer thermostat for this unit After i installed the new part I tested the units operation The unit tested tested properly No further issues with this unit

Customer complaint is the tub seal is damage on the unit I found the tub seal broken on this unit ; ordrng 1 W11498831 (Tub seal)

Customer concern convection fan motor not working. I proceeded to take back cover off and put on bake mode and found that fan motor is receiving 120 vac and fan motor is spinning. I