Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.
Local Reviews
for Port Jefferson Station, NY
Great service
Edmond - Port Jefferson Station, NY
A man that puts you at ease that he knows what he is doing.
Experienced friendly technicians! Great service & reasonably priced.
Phil - Port Jefferson Station, NY
Problem on my 10+ years LG washer quickly diagnosed & expertly repaired
The Best!
jps - Port Jefferson Station, NY
We always go to Fleet for our repairs, and the we’ve never been disappointed. Fleet’s staff and technicians are always prompt, courteous, and knowledgeable.
Honest company
Carmella - Port Jefferson Station, NY
The repairman was honest enough to tell me it wasn't worth fixing. It saved me a lot of money and heartache.
Horrible
Chris - Port Jefferson Station, NY
Couldn’t get a call back from the owner to voice concerns.

Kenny B.
MICROWAVE FRIGIDAIRE FPBM3077RFB "Customer complaint touch pad not working ,, faulty touch pad

Paul D.
RANGE LG LRE3194ST "Customers concern was not able to control the heat frost the burners, I found the problem was customer didnt understand how to control the heat on the burners with the adjustment on the control panel I showed her how to adjust it tested it all four top burners heating, cycling to factory specs"

Ryan D.
DISHWASHER FISHER & PAYKEL DD24DHT17 The seal was not seeded on motor the correct way. Took apart bottom drawer and fixed seal. Tested unit and unit is running to factory specs.

Paul D.
DISHWASHER LG LDF7551SST "Customers concern is dishwasher leaking underneath, I found the problem to be the sump Assembly is cracked will need new, part number is AGH72949004 sump assembly."

Ryan D.
DISHWASHER FISHER & PAYKEL DD24DHT17 Took bottom drawer out found drain hose with no clamps on the connection between drain lines. I clamped down on both ends and tested unit. Unit needs drain hose replaced.

Kenny B.
REFRIGERATOR FRIGIDAIRE FGTR1837TF Customer complaint light in freezer and icemaker not working found issue to be plug connector at bottom by compressor not snapped and all the way reinserted unit working to factory specifications no other issues found

Paul D.
RANGE AVANTI ER24P3SG Dropped off new oven rack at side door as instructed picked up other one

Paul D.
DISHWASHER FISHER & PAYKEL DD24DHT17 Customers concern was still water leaking under bottom drawer of dishwasher found the problem to be the coupling on the drain hose Wasnt tight filled and drained twice no leaks now working to factory specs

Paul D.
RANGE AVANTI ER24P3SG Customers concerns are oven not cooking to temperature for knobs melted and oven rack bent ; ordrng 4 G20A23-030102 (Burner knobs)s and 1 E20F01-030900 and 1 G24C01-071900 (Oven rack)

Paul D.
DISHWASHER FISHER & PAYKEL DD24DHT17 Customers concern was still water leaking under bottom drawer of dishwasher found the problem to be the coupling on the drain hose Wasn’t tight filled and drained twice no leaks now working to factory specs

Kenny B.
DISHWASHER FISHER & PAYKEL DD24DHT17 Customer complaint bottom drawer leaking found issue to be crack and drain hose need to order drain hose ; ordrng 1 522086 (Drain hose)

Ryan D.
REFRIGERATOR AMANA FADED Installed water valve and tested unit. Unit is running to factory specs.

Kenny B.
DISHWASHER FISHER & PAYKEL DD24DHT17 drain hose repaired drain line and installed connector customer

Ryan D.
REFRIGERATOR AMANA FADED Complaint: No water at dispenser. Diagnosis: Unhooked water supply line from valve and pressed switch for water and got none. The water valve solenoid is stuck closed. Order parts and return to fix unit. ; ordrng 1 W10408179 (Valve)

Paul D.
DRYER GE GTD65EBSJ0WS Customers concern laws when door was closed LED panel was /saying door open I found the problem to be the door switch and door need to be adjusted and aligned I adjusted and aligned tested 9/10 now working to factory specs

Paul D.
RANGE LG LRE3061ST/00 Customers concern is have to control panel is not responding I found the problem to be the control panel and two boards are defective I Will order parts needed for repair now?; ordrng 1 AGM73551661 (Control panel assembly) and 1 EBR77562706 (Main PCB assembly) and 1 EBR64624906 (Control board)

Kenny B.
WASHER LG WM2301HR Replaced water pump showed customer unit working to factory specifications

Paul D.
WASHER LG WM3700HVA "Customers concern was washer making a loud banging noise and us error code, I ran with load full cycle ran perfectly no banging or error code, diagnostic also ran perfectly, customer not doing loads properly I explained this to customer

Kenny B.
DISHWASHER GE GDT695SSJSS Replaced jumper harness same issue as before no display functioning tech to close out call

Kenny B.
DRYER LG DLG2302R Customer complete noisy unit found issue to be Broken rollers need to order parts estimate repair?; ordrng 4 4581el2002a (Roller supports)s

Kenny B.
WASHER LG WM3700HVA Replaced shocks ran through speed cycle no noise customer happy with unit unit running to factory specifications no other issues found

Kenny B.
DISHWASHER GE GDT695SSJSS diagnosed issue as wiring harness not communicating with boards need to order parts;

Kenny B.
DRYER GE GFDR480EF1WW "Customer complaint dryer making noise ,, Check out unit not making noise unable to verified complaint"

Kenny B.
MICROWAVE FRIGIDAIRE FPBM3077RFB Replace flash kit showed customer unit working to factory specifications had customer run microwave oven issues

Ryan D.
DISHWASHER GE GDT695SSJSS Installed main board and powered unit on. Main board that I replaced had power but did not send out power to first board I replaced. board is not sending outgoing voltage to board up top. Main Board is defective and needs to be replaced. Order board and return to fix unit. ; ordrng 1 WD21X23712 (machine cont)

Kenny B.
WASHER LG WM3700HVA Customer complaint drum is banging found issue to be suspension rods need to order parts; ordrng 1 ACV72909503 (SUSPENSION RODS)

Kenny B.
REFRIGERATOR ELECTROLUX FGTR1837TF2 Customer complaint door not sitting correctly found issue to be hinges and door crooked possibly due to an installation took pictures; snapped QuickPics

Ryan D.
DISHWASHER GE GDT695SSJSS Installed board and tested unit. main board also needs to be replaced. Order parts and return to fix unit. ; ordrng 1 WD21X23712 (machine cont)

Kenny B.
WASHER LG WM3700HVA Replace control board previous tech ordered ran unit on rinse and spin cycle no issues found ran for full cycle customer needs to reinstall washer and dryer into closet

Paul D.
WASHER LG WM3700HVA Customers concern was Washesto banging in spin cycle I had customer start loud before I got there Washer went into spin cycle numerous times with an average size loud spinning perfectly absolutely no banging perfectly level all shocks are fine could not duplicate problem unit is working to factory specs at this time I explain to customer should’ve happened again please take a video of it

Ryan D.
DISHWASHER GE GDT695SSJSS Complaint: Not getting power to display. Diagnosis: Tested power to machine control UI needs to be replaced. Order parts and return to fix unit.; ordrng 1 WD21X23702 (configured ui contro)

Paul D.
DRYER HOTPOINT HTX24GASK0WS Customers concern is when you press start as soon as you release it the dryer stops I found two problems with this unit will need to drum belt and the pulley wheel I will order parts needed now; ordrng 1 WE12M29 (DRUM BELT ) and 1 WE12X20395 (POLY IDLER WHEEL)

Paul D.
WASHER LG WM3700HVA "Customers concern is washing machine vibrating and going out of balance on just about every load no error code showing, I spoke with Keith at tech-support put unit in diagonal units spinning perfectly in all stages draining filling to factory specs springs and supports all intact found problem to be the main board is now defective this unit does not have a hall sensor all commands come from Main board and it is not working properly I will order main board for repair now; ordrng 1 EBR74282086 (Main BOARD )"

Paul D.
REFRIGERATOR LG LMXS30776D/01 First thing customer wanted done was to put next to existing door then said were refusing repair because it is a different color.

Ryan D.
WASHER LG WM2277HB Installed sensor and tested unit. Unit is running to factory specs. Customer paid balance via check.

Kenny B.
RANGE LG LSE461ST/001 Replace fan motor and terminal block showed customer units running to factory specifications no other issues found

Kenny B.
WASHER LG WM2277HB "Customer complaint te code issue is harness. Hardest part is no longer available

Ryan D.
RANGE LG LRE3883/3193/3061 Complaint: Burners and Oven not heating. Diagnosis: Checked power through terminal block and only getting 120v. Unit needs 240v. Told customer he needed to have an electrician come out and check power to machine.

Ryan D.
WASHER GE GFWR4800F3WW Installed inner drum and rotor and tested unit. Unit is running to factory specs.

Ryan D.
RANGE LG LRE3023ST Complaint: Unit preheats and then drops in tempature and does not reheat. Diagnosis: Relays on main board do not close after preheat. Main board needs to be replaced.

Kenny B.
RANGE LG n/a "Customer complaint no power to unit found terminal block damaged and fan not spinning up to speed need to order both parts ordrng 1 EAG32629301 (TERM BLOCK) and 1 EAU62343001 (FAN MOTOR)"

Paul D.
WASHER GE GFWR4800F3WW Helped Ryan will need rotor to finish repair ;

Kenny B.
WASHER GE GFWR4800F3WW

Paul D.
WASHER GE GFWR4800F3WW off machine to do tub job

Paul D.
REFRIGERATOR LG LMXS30776D/01 Customers concern is icemaker still not harvesting ice tests found the problem to be a broken harness inside the dispenser door will need new door I will order new now ordrng 1 ADD74236509 (DISPENSER DOOR SLAB)