"Cx concerns are unit is not drying dishes, visually observed that heating element is broken. I ran unit through service cycle to confirm all other components are working, unit finished service cycle with no issues, determined heater element needs to be replaced.

Installed new main PCB and tested functions of fans and outgoing voltage from board / unit working to factory specs with no further defects found.

Installed new ice maker assembly and ran through test / reset on ice maker / unit is functioning as should and advised ice production will begin in 24/48 hours / no further defects with unit.

diagnosis found physical ice maker to be working but temps are not low enough in freezer / sufficient cooling but evap fan not working / incorrect voltage at PCB to fans / confirmed with fast track diagnosis / ordering main PCB and returning for repair / no further defects / ; ordrng 1 DA92-00426A (Main PCB assy)

diagnosis dryer is igniting and heating as should / found venting to be blocked / insufficient airflow /