It’s always frustrating when an appliance won’t start, but even more frustrating when you have a load of wet laundry and no way to dry it! If your Kenmore dryer won’t start, this usually points to a power or control board issue, but there may also be other causes. Here, we break down the most common causes and solutions for a Kenmore dryer that won’t start.
This guide covers all popular Kenmore dryer models, including:
110.6001100
110.60022010
110.61202011
110.62822101
110.6407841
110.68002010
110.69422801
110.69822801
110.76481600
110.82822101
110.82822102
110.84832201
110.86094420
110.86573810
110.86870100
110.86873100
If your Kenmore dryer won’t start, the first place to check should be the power source. Inspect the outlet, making sure the plug isn’t loose and the power cord isn’t damaged. Try plugging a different device into the outlet to confirm that the outlet itself is functional. If your dryer uses a GFCI outlet (Ground Fault Circuit Interrupter), press the reset button on the outlet to restore power.
If everything is fine at the outlet, your next move should be to check your home’s electrical panel. If you’re not sure where this is located in your home, they’re usually in the basement, hallway, or garage.
Inspect the panel for a tripped circuit breaker. If you’re not sure which breaker corresponds to your dryer, look for a breaker that is in a different position from the others. Flip the breaker back to the “on” position then return to your dryer and test if this has fixed the problem.
Note: If you notice your dryer is frequently tripping the circuit breaker, this could indicate a more serious electrical problem. Check that there aren’t too many appliances plugged into the same circuit, or consult an electrician to get to the root of your problem.
If you’ve ruled out any electrical issues, try resetting your Kenmore dryer. If your dryer has experienced a technical glitch or power surge, it can freeze, meaning you won’t be able to start it. Here’s how to reset your dryer:
The door switches on Kenmore dryers are designed to prevent the dryer from running while the door is open. If your door is not closed properly or if the door switch is faulty, it may prevent the dryer from starting. If this is your issue, you might notice the door doesn’t make its usual clicking sound when you close it. You might also find the display works as normal, but you can’t get the dryer to start. Here’s what to do:
Another issue that can prevent a dryer from starting is a faulty thermal fuse. The thermal fuse is a safety device that cuts power to the dryer’s motor if it begins to overheat. If this fuse has blown, you may have noticed your dryer stopping abruptly during a drying cycle, preceded by a smell of burning. Your dryer may also still tumble, but not produce any heat. Here’s how to fix it:
If none of the above solutions work, there might be an issue with the control board of your Kenmore dryer. The control board can be thought of as the dryer’s “brain”—it controls all the commands and functions of the dryer. If the control board is damaged or faulty, the dryer may not be able to start. You also might find that the controls are not responding when you press the touchpad, and it may have no lights or power at all.
It can be difficult to diagnose exactly where an issue lies with the control board, so if you suspect it is faulty you will need to replace the entire thing. This is a complicated piece of electrical work, so if you don’t feel confident, we highly recommend hiring a professional.
To replace:
Whirlpool microwaves are highly rated and praised for their reliability. However, no microwave is indestructible;…
The LE error code on an LG washer indicates there is an issue with the…
Sometimes, the smell of gas coming from your oven can be normal and safe, but…
Is your Maytag dryer not generating enough heat or no heat at all, leaving your…
If your Speed Queen dryer is struggling to produce enough heat to adequately dry your…
There can be many reasons why your Samsung refrigerator isn’t cooling properly, and this article…
Leave a Comment