Bosch is regarded as one of the world’s best home appliance manufacturers, but even the best appliances can sometimes break down and need to be repaired.
One of the appliances Bosch is best known for is dishwashers.
In this article, we will discuss the 5 most common problems people have with their Bosch dishwashers and how you can fix them.
This guide covers most major Bosch dishwasher models, including:
GM926710
SHE44C05UC/20
SHE44C06UC/17
SHE46C02UC/17
SHE46C05UC/17
SHE46C05UC/22
SHE46C06UC/17
SHE55M05UC/50
SHE55M05UC/52
SHE55M05UC/53
SHE56C02UC/17
SHE56C02UC/18
SHE56C05UC/17
SHE56C06UC/17
SHE56C07UC/17
SHI4302
SHI4306
SHI6802
SHI6805
SHI6806
SHX46A05UC/14/SERIAL: -8210
The first problem a lot of people have with their Bosch dishwashers is when they randomly fill up with clean water. If you don’t fix the problem, you’ll end up wasting a lot of water, and water might leak out onto the floor, causing a hazard.
This problem is caused by a faulty water inlet valve. What happens is the water inlet valve fails to close when it should and stays open, causing water to fill into your dishwasher even when the cycle ends and the dishwasher is switched off.
Here’s how to check and fix a faulty water inlet valve:
The next common problem people have with their Bosch dishwashers is when they fill up with dirty water. When this happens, your dishes won’t come out clean, and you run the risk of leaks, which can cause damage to your floor and hazards.
This problem is most commonly caused by a faulty check valve. The purpose of the check valve is to make sure water only flows in one direction, which stops dirty water from flowing into the dishwasher from your sink.
To inspect the check valve:
The next common problem people have with their Bosch dishwashers is when they stop draining properly. When this happens, dirty water and debris will clog your dishwasher, and your dishes won’t come out clean.
The easiest way to solve this problem is to clean out the drain. To do that:
The next common problem people have with their Bosch dishwashers is when the dishwasher doesn’t fill with any water or doesn’t fill with enough water. When this happens, you won’t be able to wash your dishes properly.
This problem is also mainly caused by a faulty water inlet valve. The valve is difficult to repair, so your best option is to just replace it. To replace it:
The final problem is when the dishwasher doesn’t properly dry the dishes after a cycle has ended.
This problem can be caused by several faulty components in your dishwasher and depends a lot on your specific model of Bosch dishwasher. The main faulty components are usually the vent motor, the heating element, and a faulty vent.
Here’s how to fix this problem:
Front load washers are prone to attracting mold around the door gasket and other areas,…
Ovens typically last around 15 years if properly maintained, though some can last up to…
If you notice your refrigerator is leaking some water inside, don't worry—it's not the end…
Whirlpool microwaves are highly rated and praised for their reliability. However, no microwave is indestructible;…
It’s always frustrating when an appliance won’t start, but even more frustrating when you have…
The LE error code on an LG washer indicates there is an issue with the…
Leave a Comment